Editing Step 5 —
MK2(S) or MK2.5(S) step

Step Type:

Drag to rearrange

This step is for the MK2(S) or MK2.5(S) only.

For the Prusa MK3(S) with a silver PSU go to the next step.

For the Prusa MK3(S) with a black PSU go to step 7.

Install 4x cable_clip_vertical on the back of the frame. Space them evenly as shown in the image.

Go to step 8.

Your contributions are licensed under the open source Creative Commons license.