Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Insert 1x M5x8 screw into the rambo_base_lower_mount.

Thread 1x t-nut onto the M5 screw (1-2 turns) and orient it vertically.

Slide the rambo_base_lower_mount into the outside channel of the extrusion (X motor side) and down to the joining plate. Make sure that the rambo_base_lower_mount is flush with the joining plate, then fully tighten the M5 screw.

Your contributions are licensed under the open source Creative Commons license.