Skip to main content

Site Navigation

Your Account

Choose Language

Editing Step 15 —

Step Type:

Drag to rearrange

Attach the right Z motor wire to the cable_clip_vertical, with a zip tie, as shown.

Plug the Y axis motor into the correct connector on RAMBo Mini/Einsy board, as shown.

Plug the two Z motors into correct connectors on the RAMBo Mini/Einsy board, as shown. The order, (Left or Right) that the Z motors are plugged into the board, does not matter.

Verify that the connections are fully inserted and are plugged into the correct connectors.

Your contributions are licensed under the open source Creative Commons license.