Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Prepare the following parts:

rambo_hinge_upper (might be slightly different depending on the Prusa model you are building)

rambo_hinge_lower (might be slightly different depending on the Prusa model you are building)

2x M5x8 screws

2x t-nuts

Insert 1x t-nut, into the extrusion, from the top, as shown. It will fall down to the joining plate but we are going to show you a little trick in the next step.

Your contributions are licensed under the open source Creative Commons license.